Emergency protection, system-matched permanent repair, and documentation that supports your insurance claim — for commercial roofs across Tucson and Pima County.

When a storm damages a commercial roof in Tucson — monsoon wind, a microburst, hail, or wind-driven debris — the first priority is stopping water intrusion, and the second is documenting what happened before repairs begin. We run both at once: a same-visit temporary protection where the roof is actively leaking, and a full damage assessment that becomes the basis for both the repair scope and, if you're filing one, your insurance claim.
Temporary protection is usually the first step on an active leak. We can typically deploy emergency dry-in and tarping within 24 to 48 hours of a storm event, which stops interior damage from getting worse while the full inspection and permanent repair are scheduled. That temporary work is documented too — photos of the pre-repair condition, the temporary measures taken, and the date of service, all of which support a claim if you're filing one.
The permanent repair scope depends on what the storm actually did. Wind uplift at a parapet or roof edge usually means re-securing or replacing membrane and edge metal along the full affected run, beyond the exact spot that failed. Hail or wind-driven debris impact on a foam-and-coating or single-ply surface means patching the membrane, repairing the coating film, and confirming there's no hidden moisture underneath before closing the repair. Drainage-related storm damage — a scupper or drain that backed up during heavy rain — means clearing the blockage and, where the pattern repeats, correcting the underlying slope or drain capacity issue rather than repairing the same spot again next season.
Every storm repair on this site is scoped to match your existing roof system rather than mixing incompatible materials. If your roof is SPF foam with an elastomeric coating, the repair uses compatible foam and coating products at the correct thickness. If it's TPO, PVC, or modified bitumen, the patch or splice is welded or adhered per that manufacturer's specification, because a mismatched repair is often what causes a second failure at the same location within a year or two.
If you're pursuing an insurance claim on top of the repair, the two tracks run together. For a full walkthrough of what a commercial roof insurance claim requires in Tucson — documentation, meeting the adjuster, and what to do if a claim is denied or underpaid — see our commercial roof insurance claims page. If your event was a monsoon storm or microburst, our monsoon and microburst claims page covers scupper and drainage failures specifically. For an isolated hail event, see our hail damage claims page.
We're your roofing contractor, not a public adjuster — we document and substantiate the roof damage so you and your adjuster work from an accurate, complete scope.
Tell us about the building and the roof problem. We'll document it and put a plan in writing - with an honest repair-vs-replace recommendation and no upsell pressure.